HPC Clustering quickstart for Centos 6.8 and Clones

HPC Clustering quickstart for Centos 6.8 and Clones

master 10.0.0.1
node 10.0.0.100~199

yum -y update
yum -y install wget

vi /etc/hosts
10.0.0.1 master
10.0.0.100 node0000
~
10.0.0.199 node0199

/etc/init.d/iptables stop
chkconfig --levels 2345 iptables off
chkconfig --levels 2345 ip6tables off
chkconfig --levels 2345 nfs on

rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm

yum -y repolist

yum -y install yum-priorities

vi /etc/yum.repos.d/epel.repo
[epel]
priority=10

yum -y check-update

yum -y install autoconf automake openssl-devel elfutils-libelf-devel zlib-static nasm libtool uuid-devel rsync httpd

yum -y install perl-DBI perl-IO-Interface perl-Unix-Syslog perl-Net-ARP perl-CGI perl-Time-HiRes

mkdir /root/perceus
cd /root/perceus
wget http://perceus.org/Perceus/rpms/el65/perceus-1.9.5.el6-2782.x86_64.rpm
wget http://perceus.org/Perceus/rpms/el65/perceus-cgi-1.9.5.el6-2782.x86_64.rpm
wget http://perceus.org/Perceus/rpms/el65/perceus-debuginfo-1.9.5.el6-2782.x86_64.rpm
wget http://perceus.org/Perceus/rpms/el65/perceus-provisiond-1.9.5.el6-2782.x86_64.rpm

rpm -ivh *.rpm

cd /root

vi /etc/perceus/perceus.conf
master network device = eth0
vnfs transfer master = 10.0.0.1

vi /etc/perceus/defaults.conf
Node Name = node####
Vnfs Name = centos-6-1.x86_64
First Node = 1


perceus init

Do you wish to have Perceus do a complete system initialization (yes/no)? yes

What IP address should the node boot address range start at?
(192.168.10.192)> 10.0.0.100

What IP address should the node boot address range end at?
(192.168.10.254)> 10.0.0.199

What domain name should be appended to the DNS records for each entry in DNS?
This won't require you to specify the domain for DNS lookups, but it prevents
conflicts from other non-local hostnames.
(smc-multimedia.com)>

What device should the booting node direct its console output to? Typically
this would be set to 'tty0' unless you are monitoring your nodes over the
serial port. A typical serial port option might be 'ttyS0,115200'.
note: This is a global option which will affect all booting nodes.
(tty0)>
Creating Perceus ssh keys
Generating public/private dsa key pair.
Your identification has been saved in /root/.ssh/perceus.
Your public key has been saved in /root/.ssh/perceus.pub.
The key fingerprint is:
0e:08:4d:47:6b:2e:9c:5e:0a:b6:5a:e5:b4:92:31:ef Email住址會使用灌水程式保護機制。你需要啟動Javascript才能觀看它
The key's randomart image is:
+--[ DSA 1024]----+
|    ..o          |
|   o . .         |
|  . . o          |
|   o =           |
|  = B + S        |
| . % = o         |
|  = *   .        |
| o o             |
|.   E            |
+-----------------+
Created Perceus ssh host keys
Created Perceus ssh rsa host keys
Created Perceus ssh dsa host keys

Perceus is now ready to begin provisioning your cluster!
(/etc/perceus/dnsmasq.conf)

/etc/init.d/perceus restart
chkconfig --levels 2345 perceus on


wget http://perceus.org/Perceus/vnfs/centos-6-1.x86_64.vnfs

perceus vnfs import centos-6-1.x86_64.vnfs


perceus node add 00:30:48:9e:71:30
(/etc/perceus/ethers)

perceus node set vnfs centos-6-1.x86_64 node0001


You could also add the capsule to the default VNFS assignment in /etc/perceus/defaults.conf.

Powering on nodes connected to the Perceus master network will now provision them with the assigned VNFS capsule. If you need to alter the VNFS capsule, mount it with:
# perceus vnfs mount <capsule>

Chroot to the mounted directory and make changes, or use 'yum --installroot' or 'rpm --root' flags to install binaries. When finished finalize changes and recompress the VNFS capsule:
# perceus vnfs umount <capsule>

perceus vnfs mount centos-6-1.x86_64
yum --installroot /mnt/centos-6-1.x86_64 -y install yum
chroot /mnt/centos-6-1.x86_64
yum -y update
yum -y groupinstall "Desktop" "Desktop Platform" "X Window System" "Fonts" "General Purpose Desktop"
chkconfig --levels 2345 iptables off
chkconfig --levels 2345 ip6tables off
chkconfig --levels 2345 exim off
chkconfig --levels 2345 firstboot off
yum -y install infiniband-diags perftest qperf opensm
chkconfig --levels 2345 rdma on
exit
perceus vnfs umount centos-6-1.x86_64